Sync the Arlo Security Camera with the Arlo Base Station
When you are trying to set up thernnew Netgear Arlo camera, then you may have to face synchronization obstacles.rnSynchronization is one of the important things to look for the camera. If yournare getting the same difficulty, please go through the followingrntroubleshooting process or dial Arlo Support Phone Number.rnSo by following the below steps and accurate guidance, you can easily sync yourrncamera to the base station.
rnrnâ— Verifyrnwhether your Arlo camera is placed within a maximum of three feet from the basernstation. In case, it is not in this designated area, please obtain within thernprescribed limit. This is because if the base station is outside the maximumrnspecified range, then Arlo will not be able to sync.
rnrnâ— Makernsure the sync button was touched correctly or not. At the base station, thernsync button requires to be touched down for at least two seconds and afterrnthat, you need to release. If the sync button was not pressed for at least twornseconds, then this can be the reason for sync problems. Also, ensure you havernpressed the sync button slightly when your security cameras & base stationsrnare adjacent to each other, to wit, withinrnthree feet from each other.
rnrnâ— Yournneed to check the status of the Arlo camera batteries: check whether batteriesrnare properly aligned with the battery compartment. Make sure the battery is inrnexcellent condition. If the battery is over, bring the new battery and replacernthe old one. If the battery is kept perfectly, that time, you need to check thernbattery status by login to your particular Arlo account. You can see thernstatus of the battery by its icon which is placed on the top of the live camerarnfeed.
rnrnâ— Checkrnthe status of Arlo the base station: Pass the following steps to check thernstatus of the Arlo camera base station.
rnrnâ— Yournhave to download the Arlo app. If you do not have an Arlo app, please visitrnwww.arlo.netgear.com and log in to the Arlo account.
rnrnâ— Clickrnon the "Settings" menu, place the option of "My Devices"rn& tap on it.
rnrnâ— Yournhave to examine whether the base station is visible in the list of devices. Ifrnthe base station is not registered into the "My Devices" tab, pleasernadd it to the device menu on your device. After the base station is registered,rnagain try syncing the Arlo security camera.
rnrnIf you have followed all thernabove-given steps, then you need to follow some more steps to sync your Arlorncamera. You should dial Arlo Support Numberrnfor getting more possible help from the support team.
rnrnStepsrnto sync the camera to the base station
â— Pressrnand leave the base station's sync button for at least 2 seconds.
rnrn◠Ensurernthat, don’t press the button for more than two seconds. By mistake, it isrnunexpectedly pressed for more than two seconds, then the light just in front ofrnthe USB symbol will start clicking in yellow color. Then, you need to re-syncrnthe Arlo camera from the base station. Therefore, leave it approx for fifteenrnminutes and once again press Sync option.
rnrn◠Yournneed to keep your eye on the camera’s LED light that shows the position for thernsynchronization. You need to wait until the LED blinks in green color.
rnrnâ— Now,rnhead towards the Arlo Security Camera Setup and hold the "Sync"rnbutton accessible on Arlo for at least two seconds and release it after twornseconds.
rnrnâ— Waitrnuntil the LED light of the Arlo camera is not blinking in blue color. Blueprintrnof Blue Light will verify that your camera has accurately synced.
rnrnYou can follow the above steps to sync yourrncamera to the base station, and for further information, you can dia Arlo Phone Number.rnExecutives will provide you all possible help related to the Arlo camera andrnits issues.Electronic Information Storage Security Training Services & Courses