Comprehensive Information to Sync the Arlo Camera with Arlo Base Station
If you are using the Arlo wire-freernsecurity camera for keeping your house secure in a strong manner. Also, you arernwilling to know how you can set up & sync Arlo base station to the internetrnconnection. Then you will have to perform some needed steps. If you want tornsync your camera with the Arlo Pro base station. That time, you can access the Arlo base station’srnfacilities. Also, you will have the siren & USB local backup storagernoptions for storing more security videos.
rnrnPerformrnsome needed steps to set up & sync Arlo cameras-
rnrnâ— Firstrnof all, you have click on the Arlo Sign in option torncheck technical information about your camera.
rnrnâ— Afterrnthat, you need to unlock the Arlo camera battery compartment by simply holdingrnor sliding the latch.
rnrnâ— Then,rnyou need to insert the Arlo camera batteries & close the door.
rnrnâ— Afterrnthat, you have to bring your security camera within 1 to 3 feet of the Arlornbase station.
rnrnâ— Syncrnyour Arlo security camera to the base station:-
rnrn1- when you use the Arlo base station,rnthen you have to press the sync button which is present backside or left sidernon the camera. You have to press the sync button approx two seconds.
rnrn2- When you will press the Arlornwireless sync button on the Arlo base station for a long time, that time, yournwill notice LED under the USB symbol blinks amber for ten minutes.
rnrn3- After that,rnpress the sync button approx 2 seconds which you see on the top of the basernstation. After some time, you have to release the sync button.
rnrnâ— Yournneed to wait for the Arlo sync status LED for blinking green in color.
rnrnâ— Inrnthis step, you need to press the sync button approx 2 seconds.
rnrnâ— Arnblue LED on the Arlo camera will blink again and again for confirming the sync.rn
rnrnâ— Whenrnthe LED on the Arlo security camera will blink amber, that means the syncrnprocedure is not complete. You have to repeat the sync procedure again.
rnrn◠Also,rnyou have to check the LED on the Arlo base station. ( when the Arlo camera’srnLED on the base station looks in sloid green color, that means, the procedurernis complete.)
rnrnâ— Yourncan repeat this step for each Arlo camera.
rnrnHopefully, the given instruction will be quiternvaluable for you. In case, you want more information about the sync process.rnThen you should make a connection with the Netgear executives. They will offerrnyou more information.